Print PDF
Favorite
Email
Step 3Bend the first side.
Using a heat gun, heat the hanger on the top right marking.
Bend the hanger until it forms a right angle.
Run the hanger under cool water to lock the bend
Repeat with the bottom right marking.
Heat the hanger slowly and apply slow even pressure or it will snap.
Bend the hanger until it forms a right angle.
Run the hanger under cool water to lock the bend
Repeat with the bottom right marking.
Heat the hanger slowly and apply slow even pressure or it will snap.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 19, 2008. 10:36 AMgeoscirockhunter
says:
Awesome. I just happened to have a heat gun and a few dozen spare plastic coat hangers. Took all of 5 minutes to bend the hanger. Saved me $12 thanks for sharing the idea.
Reply
 |
Add Comment
|
