Introduction: Plastic Box Container LED

Picture of Plastic Box Container LED

Another waste to best lamp light....
For circuit and parts, refer my other I'bles
This is just a variation to give ideas on enormous possibilities and potential.
If you are environmentally conscious, you will find it aesthetically beautiful also!
--------------------------------------------------------
"May the good belong to all the people in the world.
May the rulers go by the path of justice.
May the best of men and their source always prove to be a blessing.
May all the world rejoice in happiness.
May rain come in time and plentifulness be on Earth.
May this world be free from suffering and the noble ones be free from fears"
---- Vedic blessing

Step 1: Components & Photos!

Picture of Components & Photos!

Components:

1. LEDs - Anywhere from 2 to 30. 

2. A ceramic capacitor 0.22 uF (of number 224 K, rated for 400 VAC) if your country provides 220 VAC. Or a 0.47 uF ceramic capacitor, if on 110 V AC Mains. 

3. Single resistor of one kilo-ohms, BUT RATED FOR ONE WATT OR HIGHER (Lower wattage resistor will BURN on AC Mains). 

4. Waste plastic box, or a container or pet bottle. Or just plain simple electrical tape!

Step 2: Circuit:

Picture of Circuit:

Comments

craftclarity (author)2014-04-14

It's great that you have decided to share your photos with us, but we need an explanation of what you made and how you made it before it can be published. Please write up a description of your project and reply to this comment to let me know that you are done.

About This Instructable

596views

1favorite

Bio: "May the good belong to all the people in the world. May the rulers go by the path of justice. May the best of men ... More »
More by pandyaketan:9 volt bolt (Flashlight conversion)LED on Mobile BatterySensor without IC Chip!
Add instructable to: