Print PDF
Favorite
Email
Step 3Make the Base
The base of the wallet will be made of just four cards. It is to made into the main pocket (where the money goes).
1. Tape together two cards at their widths, make sure to put the tape on both sides.
1.1. When doing this, apply the tape half-way on the card, and half-way down the width of it.
1.2. Then align the to-be-taped card against the tape-to card.
1.3. Fold the tape over to the other card, press down, and unfold the card+tape.
1.4. Wrap the tape around the cards.
2. Tape a third card on the end.
3. Tape a fourth card.
Now is what it should look like (1-2-3-4)
4. Tape card 1 to card 4, again at the widths.
5. Tape the bottom, but do it so they can still fold.
The pics go in order.
1. Tape together two cards at their widths, make sure to put the tape on both sides.
1.1. When doing this, apply the tape half-way on the card, and half-way down the width of it.
1.2. Then align the to-be-taped card against the tape-to card.
1.3. Fold the tape over to the other card, press down, and unfold the card+tape.
1.4. Wrap the tape around the cards.
2. Tape a third card on the end.
3. Tape a fourth card.
Now is what it should look like (1-2-3-4)
4. Tape card 1 to card 4, again at the widths.
5. Tape the bottom, but do it so they can still fold.
The pics go in order.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
