With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This a simple bolt together lock to act as a theft deterant for your PS3 (fat model). I decided to undertake this project after my house was broken in...
I used: -3/4" x 1/8" aluminum flatbar -1" x 1/16" aluminum angle -machine screws, washers, and nylock nuts -1/2" weather stripping -steel wool The al...
The angle sections are 6" long The flatbar sections are about 20.25" long, They are bent so that the center length is about 13.25" long and the legs...
Then you can add the weather stripping to the inside of the flatar to protect the PS3 from scratching.
At this point you can use the steel wool to clean up the aluminum and make it all nice and shiny. This is also a good time to see if all parts will fi...
I decided to mount my system on the side of my TV stand. This location gave it good ventilation and access to front and rear ports. At this stage I a...
Now just lift the ps3 with the bottom ange and flatbar sections as one unit into place, while holding it bolt the bottom angle into place. Line up the...
Now you are all done and can rest assured that your ps3 wont be going anywhere. If you are the type of person who needs to be mobile with your PS3 the...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »