Introduction: Plinth Eastwood Nr. 0054

Picture of Plinth Eastwood Nr. 0054

Lamp made of a cardboard packaging material

Step 1: Cutting the Cups

Picture of Cutting the Cups

Cut of two cups. A saw with fine teeth and a long blade give a nice clean result.

Step 2: Powercord Assembly

Picture of Powercord Assembly

Use a small light bulb fitting (E14). To fixate the mantle of the powercord use isolation that shrinks when heated.

Step 3: Glueing Cardboard Cups and Fitting

Picture of Glueing Cardboard Cups and Fitting

The two cups give the shade enough depth to hide the fitting and light bulb. The jointed cups also give body to fixate the fitting.

Step 4: Enjoy!

Picture of Enjoy!

Enjoy your DIY Plinth Eastwood!

Warning: be safe and don't leave this DIY unattended.


About This Instructable




More by PlinthEastwood:Plinth Eastwood nr. 0060Plinth Eastwood nr. 0022Plinth Eastwood nr. 0033
Add instructable to: