This Instructable is derived from available Internet resources on fabricating special-effect blood-shooter devices from hand-pumped garden sprayers. It seeks mainly to minaturise the design.

This particular design grew out of a general dissatisfaction with the restrictions the garden-sprayer style of blood-shooter placed on the staging and choreography of blood effect shots.

The goal was to create a device that could replace the garden-sprayer design in all situations, and add flexibility in staging effect shots.

Passo 1: Building the Control Hose

The Control Hose carries air between the hand-held remote section of the device and the effect section of the device. It is the simplest element to construct, so we'll build it first.

The control line consists of only two unique components: the hosing and identical fittings at either end. The hosing is 1/8" OD urethane line. The fittings are 90º universal fittings with 10-32 threads

Clippard Parts List:
2x UT0-2
1x 1/16" internal diameter polyurethane hose.

Substitution Option:
2x Beswick Engineering MLS-1008-1-303 instead of the UT0-2
Beswick makes the smaller, square swivels with countersunk screw-heads that work just as well as the hexagonal UT0-2 fitting from Clippard, but they don't sell them individually.

Post a comment
"I Made It" comments require images. Uncheck for normal comment.
Be nice!

Nós temos uma política de comentários em que todos devem ser gentis.
Por favor, seja positivo e construtivo.

    Sobre este Instructable

    34.637 visualizações

    98 favoritos

    Postado em:
    Nov 5, 2007