Introduction: Pocket Arsenal/survival Kit

Today I show you how to make a pen gun arsenal along with some urban survival supply's and just random useful stuff.

Step 1: Constructing Ammo Display

The basis of the kit is a pen gun.If you have not yet discovered the pen gun instructable you can find it here at: http://bit.ly/1ooVGUs
After constructing a pen gun you will need ammunition as shown on the duct tape in the top. In order to put the duct tape in the position shown simply fold the two ends backwards and stick them to the inside of the top with the large sticky side facing out.

Step 2: Gather Ammo

My ammo consists of broken pen parts, springs, modified sharpened golf tees,and paperclips. Some suggestions are airsoft bbs blow darts and anything else sharp that will fit down the pen tube.I AM NOT RESPONSIBLE IF YOU GET IN TROUBLE AT SCHOOL.(I don't recommend blow darts and bbs at school) ;)

Step 3: Gather Other Supply's

The rest if the supply's are just other daily use things I felt would be good to have.

Bottle cap ((for flicking)I will do an instructable on cap flicking on request)
Soldering iron stand (used as a phone stand and duct tape holder)
Gauze pad
A dollar
Tin foil
Plastic wrap
Duct tape(wrapped around soldering iron stand)
Miniature magnifying glass (start fire)
Mini flashlight
Rubberbands

Step 4: Store Strategically

I taped the dollar flat against the back along with my ammo to save space.the tin foil and plastic wrap are folded thin in squares along with the gauze.the soldering iron stand fold down flat. Any other supply's were just placed on top if they wee not compressible.

Step 5: Congrats!

You have a pocket arsenal/survival kit.wrap rubber bands around the tin to keep from spilling your AWSOMENESS.

Comments

author
Pure Carbon (author)2014-03-09

Im curious, what type of survival sinnario would this be used for?

author

Nice little survival kit! I must admit, I am curious to see what bottle cap flicking is and I'd love to see an Instructable on that!