Print PDF
Favorite
Email
Step 9Attach Battery Board
Before doing this test fit the main/sensor board into the body along with the hinge piece.
Once you are happy with this, remove the main board and thread the wires from the battery board through the hinge piece and cut them to right length ready to solder.
Too long is definitely better than too short (you can always loose the excess under the hinge).
Solder the wires from the battery board into their appropriate places.
Put in some batteries and test the circuit one last time before we insulate everything.
Once you are happy with this, remove the main board and thread the wires from the battery board through the hinge piece and cut them to right length ready to solder.
Too long is definitely better than too short (you can always loose the excess under the hinge).
Solder the wires from the battery board into their appropriate places.
Put in some batteries and test the circuit one last time before we insulate everything.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
