Sidstick: Pocket Chiptunes Player

Step 3 Preparation: Parts List

Here are the parts you'll need. If you've ordered a kit, double check to make sure your package has all the parts listed. If there's anything missing, just email us at [e-mail];

Voltage Regulator
MCP1700 (3V, TO-92)
Mouser Part#: 579-MCP1700-3302E/TO
Qty: 1

Tactile Switch
Mouser Part#: 653-B3F-1000
Qty: 3

HC49/US Xtal
Value: 5Mhz
Mouser Part#: ECS-50-20-4X
Qty: 1

40 Pin DIP socket (600 mil)
Mouser Part#: 517-4840-6004-CP
Qty: 1

8 Pin DIP socket (300 mil)
Mouser Part#:  517-4808-3004-CP
Qty: 1

3.5mm Stereo Headphone Jack
Mouser Part#: 806-STX-3100-5N
Qty: 1

47uF Radial Electrolytic Cap (micro-mini)
Mouser Part#: 140-L25V47-RC
Qty: 2

Propeller Microcontroller
Available at Parallax.com
Qty: 1

uSD Module
Available at Gadget Gangster
Qty: 1

10k ohm thumbwheel potentiometer
Mouser Part#:  3352T-1-103LF
Qty: 1

3xAA Battery Box
Mouser Part#: 12BH331/CS-GR
Qty: 1

SIDStick PCB
Available at Gadget Gangster
Qty: 1

32kB EEPROM
Mouser Part #: 24LC256-I/P
Qty: 1
If you get this with the kit, it will be pre-programmed. Otherwise, you'll need an EEPROM programmer like a PropPlug.

10k ohm resistor (1/4 Watt) - (Brown - Black - Orange)
Qty: 4

.1uF Radial Ceramic Capacitor (104)
Qty: 5

Rectangular pin headers
Qty: 6

Machined pin headers
Qty: 2