Print PDF
Favorite
Email
Step 9Make: Step 6
Snap in the sockets. The 40 pin socket goes at U1, right in the middle of the board, the notch is closer to the 2 electrolytic caps.
add the headphone jack next to the buttons
The 8 pin socket goes at U2, the notch is closer to the edge of the board.
Now, push the Propeller into the socket - the notch on the chip pointing the same was as the socket. Same for the EEPROM.
add the headphone jack next to the buttons
The 8 pin socket goes at U2, the notch is closer to the edge of the board.
Now, push the Propeller into the socket - the notch on the chip pointing the same was as the socket. Same for the EEPROM.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
