Pocket Drunken Robot

Step 2 Cut The Tin

Print out the template from step 1 (also linked below) Be sure to print it at 100% and transfer the design to your piece of tin. (Cut it out and trace it or just glue it on with some temporary adhesive.)

Cut and snip your tin on the solid lines. Please be careful when cutting and handling sheet metal since it can get really sharp. Gloves and safety goggles are recommended.

Comments

[zombiefire]

cut an aluminium can

[Grathio]

I've tried it with aluminum soda cans and it didn't really work well. It was too springy and weak to hold everything together properly. A better household option is a tin (steel) can lid.

[fireruler12]

where did you get the tin