Instructables

Pocket Full of Anything - evenToothpaste!

Featured
My work can get pretty ridiculous. Some nights I have to work all day, all night, and half the next day... 30 hours straight. It would be nice to be able to bring a suitcase full of stuff from home. But if it doesn't fit in my scrubs or coat, I might I well leave it at home, cuz I'll lose it before the end of a busy call, which just adds to the frustration of what is already a stressful situation.

The bare essentials are food and water. No problem. I have my ID card, and with it, I can buy stuff from the cafeteria during certain hours. Then there's the snack bar that's open 24/7. But for when I am too busy and too far away, I try to carry a supply of dimes for the snack machines. (Dollars are an iffy proposition, and dimes are lighter than quarters!) I also know where to steal graham crackers and sodas (in event of an emergency! :)).

But that leaves my personal hygiene. Towards the end of this ordeal, I can find myself feeling pretty rank. There are several places where I can find a hot shower and soap. But for toothpaste, toothbrush, and my essential LA Looks Megahold hair gel, I'm on my own. I have stretegically placed a bottle of said miracle gel in my call room... but that's wishful thinking. Often, I see this call room and it's comfy bed only twice... once when I get to work to drop off my things, and once before I leave to pick up my things. What I really need is something more pocket-sized. And here it is.

I will demonstrate on toothpaste, since I already have a packet of hair gel prepared.





 
Remove these adsRemove these ads by Signing Up
A guy I knew in High School used the edge of a paperback book and a butane lighter. He cut the plastic bag and placed the part he wanted to keep into the bok leaving just the seam to be sealed exposed about 2MM.  Pretty quick and efficient.l
I just tried that with a block of wood. It works great, thanks.
lclippard3 years ago
i wonder if a low temp hot glue gun tip would work, sans glue sitck?
That's what I was thinking...
Isurvival3 years ago
awesome, and easy to do-I don't want to spend a lot of money, on a "bag sealer", but I will try this method! thanks a lot!!!!!!!!!
sdtacoma4 years ago
I think I am missing something here. The Instructable says to, "Then set it to 190C or 370F". My soldering iron only gets up to 350 degrees which is plenty hot enough to melt the bag. I thought the idea was to use a temp that was cool enough to seal the bag, not melt it. So, I was expecting to have to turn the soldering iron down.

Am I missing something?



uhm, when you melt the bag you essentially SEAL it when it cools down.
klee27x (author)  sdtacoma4 years ago
Yeah, you're missing the difference between Celcius and Fahrenheit. A soldering iron that only goes to 350F would be pretty useless.
Thanks for the reply. I think the issue is how I am getting the soldering iron temperature. I was using a cooking thermometer which I don't think is the most accurate way to do it.
klee27x (author)  sdtacoma4 years ago
Ahh, yeah. That's definitely off. The lowest melting point solder available is the 63/37 eutectic stuff, with a melting pont around 360F.

And to seal the bag, it definitely has to melt. If done just right, you keep the point moving, and the bag melts and fuses as the tip moves along.

It's rather difficult to get a very good seal this way, compared to a heat sealer. You have to experiment with your temp and rate. And you have to make sure that the work surface isn't sinking heat away from the bag. Try doing it on a wood cutting board, an old book, or a stack of papers.
Ushanka6 years ago
This is really brilliant, and far less expensive than those tiny toothpaste tubes sold at pharmacies. I use tiny plastic zip bags for coins, but I often find other uses for them, like toting medicine or small samples of herbs/spices. I suppose your version is more waterproof (and cheaper), so it could be used for, say, contraband liquor. Not that I'm endorsing that or anything, but perhaps...
klee27x (author)  Ushanka6 years ago
Liquor? Maybe. I would use a thicker bag for that, though. Maybe 3 or 4 mil. This might also be a good application for carrying around fine white powders!?! Such as this: Easy! It's laundry detergent, guys!
FEG.jpg
you should seal a razor blade and a little bit of straw in those bags and place them on random people's doorsteps! lol
lol..."laundry detergent..."
COCAINE!!!!!
the dry stuff will cake to your septic tank and you'll have to get it pumped
herbs yes hers it oregeno yes its oregeno cops it is i swear pleas dot give me a ticket sorry couldent help my self
Ushanka Ushanka6 years ago
Also, it sounds like you made your own impulse sealer. Will we get to see that in an instructable too?
klee27x (author)  Ushanka6 years ago
Do you mind if i ask, what happened to your hand?
klee27x (author)  technodude925 years ago
A car pulled across the street in front of me when I was doin' 50 mph on my motorcycle. His front fender stopped my bike. I skidded down the street about 50 feet. He took off and wasn't caught. *shrug*
Ushanka klee27x6 years ago
That looks like something I could do! Is that nichrome wire you're using to seal the plastic?
klee27x (author)  Ushanka6 years ago
Yep. That's 26AWG. The parts are made of plexiglass, which I found isn't quite up to this task. I had to resurface the blade, once, after about a couple hundred seals. If I get to the point where I need to service it, again, I'll replace the blade with lexan.
LuciferRex4 years ago
This is soooo awesome!
friney234 years ago
Would the melted plastic release toxic chemicals into the stuff you put into it (e.g. something you put into your mouth such as food)?
klee27x (author)  friney234 years ago
If it's polyethylene or polypropylene, there's no reason to think the plastic would be any worse for your health than the commercial food sealers. Those types of plastic are about the safest you can get. The tip of your soldering iron might be a different story.
mm, flux and lead. delicious. and deadly! but then again, I live on the edge.
dodo915 years ago
" I've got a pocket yeah a pocket full of sunshine"
Treksie5 years ago
Being a bit persnickety myself, I love that you got all "fancy-pants" about it. Thanks for sharing this great idea!
munchman5 years ago
This is awesome. I would have never thought of using a soldering iron to make bags. Now I can finally complete my project.
ARTYFISHALL5 years ago
It seems like a lot of trouble to go to. What's wrong with just taking the tube of toothpaste?
I hate packing in the whole tube when there is just a small amount left. Or if you are worried about weight (every little bit helps when flying lol)
holy cow, I don't know why *I* didn't think of this lol
I used to have one of those "Press & Seal" sealers, this would have been a lot easier and cheaper. Thanks for the idea!
randomhat5 years ago
If your going to go this route, you might want to check the pharmacy or the dreaded walmarts toothbrush isle. There's this type of convience toothbrush that has the toothpaste on the inside of the handle and you turn a dial to squeze it into the brushhead.
frag_bomb6 years ago
all the drug dealers will love this
mooshisho6 years ago
Awwwwesome. :) I'll use this to make little hot sauce packets (Sriracha!)for lunch. :P
Charles IV6 years ago
I tried doing this a while ago without the straightedge and well, it didn't work so now I know what I did wrong.
Gnome6 years ago
Hey, carrying dimes or quarters weighs exactly the same. Dime: 2.268 g Quarter: 5.670 g.
(2.268*2) + (2.268/2) = 4.536 + 1.134 = 5.67 g.

Awesome Instructable!
waterppk Gnome6 years ago
I'm consistently amazed at the things people are investigating. Next we'll be presenting the mathematical function on how to best carry change, making you able to produce any dollar amount with the minimal weight, while ALSO maintaining the ability to purchase at least 3 mountain dews and a thing of twinkies
Ahem. I read somewhere that the most efficient way to carry the most change is as follows: Three quarters Two nickels One dime Four pennies If you're only interested in carrying enough change to make up balances of less than $0.50, then you could lose two of the quarters. I generally keep this $0.99 in my pocket, and it saves my pocket from filling up with nickels. Ask and ye shall receive.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!