Introduction: Pocket Key Knife With a Pen
Wow hello readers tired of losing your keys, not having a pen when you must need it, having the urge to cut something and you left your knife at home
Well now thats just the past
Pocket Key Knife with a pen
(aplauses)
this instructable is easier to explain in pics, i hope you like it
Step 1: Get the Keys and Materials
Step 2: Tools
Note: you dont need all thes tools but they woud make your life much esier and will safe hours of work*
Step 3: Select What You Want in Your Knive
Step 4:
in this step you will have to decide the mesures of your keys and you want someting that looks lide this
Note: i chose 12mm cause that is measurement of the broken saw
Step 5: Grind the Keys
Step 6: Holes
for this you can use the equivalent of the dremel
and use one key as a patron
Step 7: Give the Shape to Your Keys
now take all keys together and shape them
Step 8: Time to Make the Holder
Step 9: Make the Holes for the Holder
Step 10: Preparing the Holder
Step 11: Washers
for this part you need to fill the gaps (see previo step last pic)
to see how many washers youll need
Note if you can get smaller washers please do
Step 12: Making the Pen
Step 13: Riveting
Step 14: Final Touches
Step 15: Optional Acid Carving
Step 16: X D the End
i hope you liked this instructable, im sorry if i have made some mistakes, my inglish is a little bit rusty, so feel free to make any correction so comment
good luck and good night everbody
Participated in the
MakerBot Challenge