Pocket LED Light (like a lightsaber a bit.. kinda usefull)

Step 4 Assembly:

Put the button in its hole and carefully slide the guts in making sure they stay aligned.
If it is loose wedge a little paper next to the battery's to hold it in place.

Slip the tracing paper in and make sure its neat and no gaps are there, a little overlap inside is ok.

Put the clear end cap on. If its tape cut bits around the edge and fold over. if its paper then do the same and wrap a little tape round to keep it there.

Double check the guts are fitted in ok, and then tape up the base as neatly and secure as u can.

And then ure done :)

press button and u have a mini pocket strip light :D that is great for finding ure way in the dark, signaling things in bad weather conditions, clubbing, having light saber fights with the cat (its true :3 ). enjoy :3

Comments

[airbourned]

these would make cool bikelights to attach directly to the frame using velcro

[Bongmaster]

probably, as a visibility thing, they wont illuminate much around u tho X3

[The nerdling]

cool