Picture of Pocket Paracord Dispenser
For this instructable I show how to make a cool pocket paracord dispenser. It holds 35 feet of cord and dispenses with ease.
Remove these adsRemove these ads by Signing Up

Step 1: Materials...

Picture of Materials...
bolt and nut.jpg
You will need a bolt, nut, empty 200 count tic tac container, and paracord.

Step 2: Drill Some Holes...

Picture of Drill Some Holes...
Drill a hole through the center of the closed tic tac container, Insert the bolt and lightly screw on the bolt, tape the end of the paracord to the bolt.

Step 3: Wind it up!!!

Picture of Wind it up!!!
Its a long and boring process but wind up the paracord by twisting the bolt.
johnbabalon2 years ago
Hey man, I'm fourteen also and i think its great how you're into this kind of stuff. I thought it was a great idea and i cant wait to try it myself but i think that instead of winding it up by hand i'm going to get a little help from my friend, the power drill. -- Live long and prosper
theslingshotkid (author)  johnbabalon2 years ago
Thanks, I found it easier to do by hand but whatever your more comfortable with. I would recommend a slower speed when using the drill. Its cool to know I'm not the only 14 year old on here.
mattyuke2 years ago
You should add a sharp blade to the bit that opens and closes so it cuts it without needing anything else. Or you could mount part of a Stanley knife blade to the bottom of the opening and push the orange opening down onto the blade to cut the para cord.
nwhyte2 years ago
Alternatively you could put the end of the bolt into the drill and wind it up mega quickly XD
Petergottm2 years ago
That's really cool!