Instructables
DANGER THIS CAN SHOOT YOUR EYE OUT OR BE LETHAL.
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED! NEVER SHOOT AT THE FACE OR AND ANIMAL!

I will be showing you how to make a Bic Pen gun that shoots 100+ feet and is smaller than your finger

See picture for materials.
only one pen is needed.

!I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED! NEVER SHOOT AT THE FACE OR AND ANIMAL!
 
Remove these adsRemove these ads by Signing Up

Step 5: Ranges and ammo

The Pen Gun will shoot about 100+ feet. Yes I know that sounds scary. When you use a flat rubber band (The best ones in my opinion), a long ink with fletchings (6 or 7 inches, get a long pen form dollar store or fair) it will shoot that far. I shot to about 3 house down from mine.
IF you want to shoot at friends for fun, I recommend to take tape and wrap a thick layer around the tip so it WON'T puncture skin.
1-40 of 61Next »
Craig gomes2 years ago
Nice gun looks dangerous
UberPug6 years ago
i made one of these before and if you shoot it hard enough, ink comes out the back.
maxxxem (author)  UberPug6 years ago
wow never done that before but i did have the tip hit the wall and break off and splatering all over.
I made adent in my wall. Is ist sooo awesome!!
This owns. Its great to bring to school
I had the same problem.
(hint hint)
me too
ye i had the same problem
THECHINABOY3 years ago
THIS IS SO COOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!THANK YOU! THANK YOU! THANK YOU! THANK YOU! THANK YOU! THANK YOU!
the rubber band kept comming out
i had the same problem get some sowing thread and wrap that tightly around the rubber band before taping it that helps alot
the thread idea is so good!!!!! thx
wrp th tap tightr thn
dirtnap glugnar5 years ago
lol? English man
glugnar dirtnap5 years ago
oh srry i didnt have a lot of time i ment "wrap it tighter then" hope that helps
glugnar glugnar5 years ago
wrap the tape tighter then*
copier
 how did he copy
sorry i posted that comment on the wrong ible
Which ible did you mean to post it on?
I forget
CaseBoy4 years ago
first of all, i just have to say I love these things! But the rubber band seamed to slip out. so i thought i should post a comment on how to fix it...it is so simple! 1 once you have the big rubber band on just rap some braces rubber bands over it. 2 when taping don't cut the extra rubber band off,and tape then fold extra down over taped portion and tape again.
You can avoid it sliding out by holding it differently, squeeze the device through the rubber band so it is completely in place.
drewboy1904 years ago
its grat nice ible
 if you tie a knot it relley helps 
reynners5 years ago
CAn this shoot airsoft pellets/bbs?
maxxxem (author)  reynners5 years ago
no
Ace.88 maxxxem4 years ago
With maxxxems permisssion i will see if i can mod this to shoot airsoft BB's. Can i maxxxem?
maxxxem (author)  Ace.884 years ago

go ahead
 

Ace.88 reynners4 years ago

Ill see if i can meke 1 that will (AND give credit to maxxem of course :P

Colonel885 years ago
I never try to push the limits on my rubberband guns because they might break O:
sharlston5 years ago
i know it says ignore but what is the paper clip for?
maxxxem (author)  sharlston5 years ago
it was a tool
what sorT?
benlee11145 years ago
for some reason the rubber band keeps on coming out wtf >.< -.- =.= -_- -_-
amakerguy6 years ago
Cut off the head of a medium nail and shoot that. :>
why?
it would be a nail gun!
I accedentally made a deep hole in my neighbour's house...
vandal11385 years ago
impressive. it put a hole in a paper bag.
1-40 of 61Next »