With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This Instructable will be for my version of the pocket-sized airsoft machine gun. This WAS NOT my idea.
PLEASE READ!!!!!! You will need: -Drill or Drillpress *not pictured* -Drillbit Size....1/4 in. Medicine Bottle/Film Canister *pictured* -6mm pen tub...
First, you will need to drill a hole in the side of the medicine or film container with the 1/4 inch bit. Next, you will need to drill a hole in the c...
The title says it all. You will need to remove the end cap, ink cartridge and anything else left inside of the pen. Once, you are done with all of thi...
Simple, put the pen tube into the cap of the container and fit it to your liking.
There are two ways to reload: 1. Pour bbs into top after popping off the cap 2. Drop bbs in through the side hole a few at a time
To fire place lips on the side hole while covering up the little hole in the back. You may not get it on your first couple trys but you'll get the han...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »