Print PDF
Favorite
Email
Step 4Stop, Solder Time!
I began building the circuit by soldering a wire in between the 3/32" jack and the momentary switch. After the glue on my modified battery holder had dried enough to work with, and observing polarity, I soldered its wires to the unused terminals of the jack and switch to complete the circuit. I use heat shrink tubing to cover all solder joints.
A multimeter is a must-have when working with electronics. Use it to help you verify polarity before you solder. I've never done it, but I imagine it's no fun to brick your camera!
A multimeter is a must-have when working with electronics. Use it to help you verify polarity before you solder. I've never done it, but I imagine it's no fun to brick your camera!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
