Pocket-Sized Spray Paint

Hey internet, remember the Pocket Graffiti Pen?, instead of fainting while trying to tag something, try it with compressed air!

I am expanding on the same idea as PocketSized so he deserves most of the credit. :-)

Step 1: Supplies

You need:

-a pen with a fiber tip
-a pen tube with a hole in it
-compressed air/gas duster


The 10oz duster is a little big to fit in a pocket, but I have seen little air dusters at staples that would fit perfectly into a pocket.

Comments

[ilpug]

you could steal the 45 degree nozzle on a canned air can and put it on a butane can. butane cans are smaller and last for quite a while. only problems are that butane is really flammable and i dont know if the gas could damage the quality of the paint.

[dergon]

LOL i blew up a can of butane once

it was about the same size as a 400ml spray can if i remember

[ilpug]

Using an air duster can would make the in freeze anyway.

[WrestlerHoney]

thank you soo much, ive been trying to find a way to make a cheap but high quality spray painter, and i found it!!! yay!

[commanderzhao]

hey, I live in montana too

and I've never heard of mt spraypaint

[ahjeeze]

montana spraypaint sells cans a little smaller than an axe can for less than 5 bucks just to save you guys some trouble and money

[hernanai]

I looked at their website a couple of months ago and can't really make heads or tails of it... It's too art based of a website, which isn't bad, but if you're trying to find Paint it's a bit difficult... Any tips?

[ToxSick13]

I had trouble with the montana website as well there is a website (oinkartltd.com) that sells all of the different kinds of montana cans. They have great customer service. I would highly reccomend them. Also, search for them on youtube, they have lots of videos testing their products :)

[hernanai]

Even after a year I wasn't expecting a response. Thanks for the link, I'll check it out.

[ToxSick13]

sure, no prob

by the way, if you have any questions, you can email James, (the owner of the site), and he'll get back to you really quick :)

cheers ^_

[cowscankill]

great!

[steed1172]

very easy and neat Instructable

[bumpus]

Thanks a lot!
Might you be interested in this instructable as well?
Don't forget to vote!

[kenny94]

here use this stencil

[littlechef37]

If you used copper pipe and stored the fuel somewhere else you could make a FLAMETHROWER

[ooda55]

haha nice idea those smaller canistors will ahve to be a LOT smaller you can get tiny cans of spray paint from my local hardware store for about 3 quid but its still a good way of improvisong you could try it woth those blo-pens but there real messy

[gbosbiker]

how much did this cost to do?

[bumpus]

it was free, i had everything within my sitting distance of my office chair..

[quinnriley]

It is too big.

[Obsessive]

Thats awesome. I've got to make it.

[akaeon182]

you could leave the red hose thing on but cut it down a bit so that way you make sure that you don't accidentally cover the hole with sticky tac or anything else if you used something more permanent and unrepairable.

[thebboy]

cool, nice variation. i might try this if i really like the other instructable, wich i do

[LinuxH4x0r]

I might actually make one! Great job!

[darth2o]

So, what are the smaller dusters at Staples called?

[bumpus]

I'm not sure but i know for sure that i have seen smaller gas dusters there

[Bran]

I like it! Nice presentation and documentation!

[bumpus]

thanks, i like your deer, looks to be an 11 point haha

[Bran]

Sure is, I hope to be getting it back soon from the taxidermist. It's quite the special deer - my best and my first.

[bumpus]

sweet

[Fearbot]

cool im about to do that with mine if i can get some money to buy more pens