Pocket size Espresso Machine with integrated alcohol stove.

Step 15: The Brew Head, build part 3

1. Ugly solder the small copper filter to the 1 to ½ in reducer.
2. Ugly solder the ½ in cap to the 1 to ½ in reducer
3. Cut the water tube coming out of the boiler so that it’s flush with the 1in cap.
4. Ugly solder in place
5. Cut a ¼ in piece out of a 1 in hose gasket
6. Place in brew head top
7. Place 1 in copper filter
8. Place 1 in hose gasket to hold the filter in place.

Comments

[fireice289]

I clicked on this project on a whim, and I am very glad I did. I really love how you wrote the instructable and it is even better for the results. Glad to have seen this.

[tdawber-mandeno]

http://www.amazon.com/Bialetti-replacement-gasket-filter-makers/dp/B000SOLUCU/ref=pd_sim_k_1
i wonder if this could be cut down used to fit. the rubber doesn't under preform and the gasket head/ filter is really strong i know it could be in potential breach of you rules

[urant]

Yes, it could.
BTW, my rules don't need to be your rules ;)

[tdawber-mandeno]

I know but it makes it so much more fun
thanks

[urant]

Yes, it really does :D