With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
In this instructable, you will learn how make a cool, fun, and harmless explosion that is a cool party trick. All you need for this Instructable is a ...
Many of you probably already know this trick, but just in case you dont, this is how you make a square out of a regular peice of printer paper. First...
This is hard to describe, but what i did was i made a pyramid and then i pushed two side into it untill they met. Then you lay it flat so it looks lik...
Now you want to take the bottom corners and meet them with the top point. You need to do this on the right and left side, then turn it over and do the...
Now the paper should look like the first picture. Now, you want to take the right and left corners and fold them into the middle. Then, turn over and ...
Now, the previously folded flaps should have an openning on one side. Take the bottem flap and insert it into the opening. Do this on all sides.
Now you should be able to unfold it to were it looks like and X. There should be a small hole on one side. You may want to cut the hole a little bigge...
Okay, now you take the lighter, and put it very close to the hole. Hold down the button so that the lighter fluid flows into the balloon for about fou...
Please vote for me! I hope you like the Instructable and enjoyed it! (BTW this is my first one!)
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »