Pocky tray Storage Tray..

Step 4 Assemble:

Now get your skewers and 4 of the straw bits.

Push the skewers through the holes, and pop a straw on the underside of the tray oneach (making sure the sharp end is pointing up).

Now place it in the bottom tray (the one without holes in) so that its standing on the 4 straws and the skewers. (the amount of skewer wil be the same leangth as the straw bit)..

Be sure that the trays are facing the same way, there is a bit cut out of one end.

It should be quite firm once the bottom and middle trays are together.

Now place the other 4 straw bits onto the skewers in the middle tray so they are sitting just like the ones bellow in the bottom tray.
Carefully line up the holes in the top tray with the skewers and slot it in place on top. the structure is now more ridgid and the layers are sitting happily on all staws.

To finish it off get the reamaining 4 straw bits that were left over from the cutting and place them over the tops of the skewers (to cover the sharp woody points).

And there u go :) a simple quick storage rack out of pocky packages ;) u can store pocky in it :D or whatever else u want..

Comments

[whisperonthewind]

Okay, what's pocky?

[Bongmaster]

some biscuity stick thing dipped in chocolate with other flavours too from japan mainly, pretty nom. found it at an international food shop