Introduction: Polymer Clay Milkshake Tutorial

Picture of Polymer Clay Milkshake Tutorial

Step 1: The Body / Cup

Picture of The Body / Cup

Take your light pink polymer clay and roll it into an oval with flat ends.

Step 2: The Froth

Picture of The Froth

Roll out your white clay into a long, thin 'snake'.

Step 3: The Froth 2

Picture of The Froth 2

Take the long piece of white clay and wrap it around the outside of the body / cup, the top should be flat.

Step 4: The Froth 3

Picture of The Froth 3

Now continue wrapping it up.

Step 5: Cutting the Froth

Picture of Cutting the Froth

Cut off the excess clay from wrapping it.

Step 6: Eyes and Cheeks

Picture of Eyes and Cheeks

Add small black dots for the eyes and small pink dots for the cheeks, both the same size.

Step 7: If You Want It to Be a Necklace...

Picture of If You Want It to Be a Necklace...

Add an eye pin if you want it to be a necklace, bracelet, keychain, etc.

Step 8: Done!!!

Picture of Done!!!

Your polymer clay milkshake is now complete!!! Yay!!!


TheEnderQueen (author)2014-07-06

Thanks! Kawaiilover

marionpixie (author)2014-03-16

how did you make your figure shiny?

marionpixie, I used a gloss glaze. I use one by sculpey, since I use sculpey clay! It costs about $6 for a small jar, but a little goes a long way!

Thank you.

kawaiilover (author)2014-01-12

Cute I love it

About This Instructable




More by TheEnderQueen:Red-Tailed Black Cockatoo Polymer Clay PendantDelicious Garlic Pita ChipsPolymer Clay Milkshake Tutorial
Add instructable to: