Print PDF
Favorite
Email
Step 3Put together and balance.
Take the cut out bits and slot them together. You can use tape if you have cut the slots too big.
Balance the plane by putting some clay/paperclips/stuff on to the nose. Make a 'V' with your fingers and balance the plane about 1/3 from the front of the wing. Add or subtract the stuff you put on the nose for balance.
Now chuck it!
Balance the plane by putting some clay/paperclips/stuff on to the nose. Make a 'V' with your fingers and balance the plane about 1/3 from the front of the wing. Add or subtract the stuff you put on the nose for balance.
Now chuck it!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
