Print PDF
Favorite
Email
Step 10Plug it all in
Plug in all the clamp lights and clean up the wires with zip ties so that they don't dangle.
Don't zip tie the lamp wires to the curtain rod in case you want to move them around (as it will make this easier).
Make sure all the clamp lights and the power strip are in the 'on'-position.
I spun the power strip so that its on the top-side of the curtain ride. When it is on the bottom side, gravity is pulling down on the plugs and it seems like they might fall out over time.
Don't zip tie the lamp wires to the curtain rod in case you want to move them around (as it will make this easier).
Make sure all the clamp lights and the power strip are in the 'on'-position.
I spun the power strip so that its on the top-side of the curtain ride. When it is on the bottom side, gravity is pulling down on the plugs and it seems like they might fall out over time.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
