Print PDF
Favorite
Email
Step 4Prepare with wire
Cut the extension cord in half. Strip back about 2" -3" of insulation to reveal three insulated wires (typically black, white and green). Strip an inch of covering off each of these wires.
Pass each end of the stripped wire through one of the holes in the mesh that you just made. Once passed through, bend it back upon itself and fasten this loop with a zip tie.
Pass each end of the stripped wire through one of the holes in the mesh that you just made. Once passed through, bend it back upon itself and fasten this loop with a zip tie.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
