# Pop-Up Pyramid

How to make a pyramid pop out of a plain piece of paper.
Remove these ads by Signing Up

## Step 3: Repeat the Square and Line

Rectangles are OK, too.

## Step 4: And Again

A couple more times should do it.

## Step 5: Cut!

Bust out the razor and cut along the lines. Goes much faster if you do all the verticals first, and then do the horizontals.

## Step 6: Pull!

Grab the center square and pull it out. Your plain piece of paper is now a funky bit of pop-up pyramidness.

## Step 7: Get More Elaborate

If you have a serious case of OCD or a laser cutter you can take a simple idea to some ridiculous extremes.

## Step 8: Change Direction

Instead of drawing squares and then lines, try drawing just squares with a 1/4 rotation in each successive square.

In other words, leave a gap on the right and left for the first, the top and bottom for the next, and back and forth and so on.

## Step 9: Change Shapes

Here's an example of a circle design with a slight twist to it. It's too subtle to really see here, unfortunately.
 1-40 of 101 Next »
nikkim19 days ago

would it turn out okay if you use a rectangle instead or would it turn out differently?

malialtin3 years ago
These are a few of my trials... If you choose irregular gap widths and lengths between lines you will have a 3 dimensionaly self bending form while it is hung from apex.
fungus amungus (author)  malialtin2 years ago
Whoa, these look great.

playful-geometer3 years ago
This looks really fun, I think it could make some fun deco attaching them to ceilings. If I do end up giving it a try with my CraftRobo Pro, I'll post my cutlines...
foks3 years ago
thinking about projection from the top on this. im making pyramid to test
Michaelgoode4 years ago
nice
Meganoki4 years ago
really cool!!! i did it ont he first try!!
SevereFlame7 years ago
Are you using cheese!?!?! LOL
4 years ago
Nope, .. .  'E's usin' COCONUTS!!!
5 years ago
they aint using cheese! duh
KnexFreek4 years ago
cool :)
=SMART=6 years ago
Here are my attempts :P mine seemed to just get wider as i drew the boxes lol
5 years ago
Wow nice, looks great if you ask me.
uzerzero7 years ago
I'm loving the fountain pen :) I like doing little tedious things like this to pass time in class, or at work, but unfortunately X-Acto blades are frowned upon at school. If there was a method to do this that didn't involve an x-acto blade, this would be really incredible :)
7 years ago
Well a teacher seeing you in class cutting paper with scissors OR an exacto would be a little worried. What i do is run a regular ball point pen along hte lines over and over again with lots of pressure untill it 'cuts' the paper it doesnt look as clean, but it works!
7 years ago
When i'm bored in class I do this and it works. When using relatively thin lined filler paper, you only need to push down hard enough the first time and the paper will neatly split.
5 years ago
Newspaper is easier. *wink*
5 years ago
or bring a little razor blade to school and keep your jacket sleeve over your hand? or just use a pocket knife and tell your teacher its for self protection...
5 years ago
self protection... that wont get you suspended at all......
5 years ago
a guy inventeda marker with a little tiny razor blade in it. could use that.
5 years ago
use just 1 blade of sciorrs to cut and it works like a blade
6 years ago
a metal compass' pointy end works well... just score over the lines and separate.
6 years ago
How long has that been your profile picture? I THINK U COPIER AUGHGGHGHGHAUFHGHGG (my war cry)
7 years ago
You can take apart a cheap plastic pencil sharpener for the blade. Then pop it back in when the teacher comes to look at your work.
7 years ago
If you fold your sheet of paper down the middle then you can use scissors instead of a craft knife. Fold, make a cut in each end of your foldd sheet, starting at the fold and ending before you reach the oppoite side (because you'll end up with two pieces of paper if you cut any further). Unfold and fold in half 'the other way' and make another two cuts. Repeat from the top with more cuts going towards the center of the paper.
fungus amungus (author)  uzerzero7 years ago
If you can use scissors, go for those. Open the scissors up all the way and use them like an x-acto to start all the cuts and then fold them back up to cut like normal for the rest of it.
queen roo5 years ago
wow! and you did that with paper?? i never knew....
Xenel5 years ago
can you post the circle variation and maybe some other shapes?
babymama115 years ago
this was so much fun i cant believe it. but my cuz showed me a hardr way: get a square peice of paper then cut verticle lines 'bout 1 cm. apart next make horizantal lines then add a little line going down the horizantal lines its juct like yours fungus but its more complicated **how do u make the circle pyramid?**
aufachse55 years ago
very niec great job
babymama115 years ago
this was so awesome to make! out of paper
Bassystacey6 years ago
Cool! It worked!
Metaferia6 years ago
did someone done this in paint or word? it will be much easier and will look nicer. thanks
=SMART=6 years ago
Very nice, i like the circle variation too, ill try this now and post pics later :D
Braeburn6 years ago
laser cutter + sheet metal and hooks...
jonathansmith6 years ago
cool..would really look good on thin metal sheets...hmm..ill try it out and post some pics!
majjck6 years ago
wow, i always wanted to know how they made these. nice job!
noahh8 years ago
nice
6 years ago
right on
Uru Wolf6 years ago
I might have to get some sheets of a3 or bigger and try this. I think my OCD is calling, lol.
 1-40 of 101 Next »