With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
This instructable shows how to make a bracelet out of the thingys on top of soda cans.
Get a lot of soda can tops. I'm 13 and I used 14 on this one. I used 17 on my other one so get 25 and you should be okay. You also need string. ...
Put the loop through the top hole as shown in pic 1 Put the 2 ends through the loop as shown in pic 2
go around the sides and down through the bigger hole.
put the string down into the smaller hole, around the side to the top, and down through the big hole.
Repeat on other side, and pull tight.
Repeat steps 4 and 5 until desired length.
once it's long enough,put the string down and throug as you would (pic 1) tie a pretzel knot around the side of the pop top
Cut off the exess and you are done. Show off as much as you want.
I just finished doubling it and taking pics, so the 'ible will be up in a matter of days.
Tag files as:
Posted:Oct 6, 2008
How to make belts and bracelets out of soda pop tabs
Pop Tab Belt with Tab Clasp
Soda pop tab bracelet
Hemp and Ribbon Crochet Jewelry
Soda Can (Pop-top) Chain Mail - Specialty Category (Advanced)
Recycled can woven cuff bracelet
Soda Can (Pop-top) Chain Mail - TabScale Category
Pop Tab Bracelets
Soda Can (Pop-top) Chain Mail - TabMail Category
Recycle Soda Pop Tabs Into Chain Mail
Download our new apps for iOS and android!
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.