Introduction: Sawed Off Double Barrel Shotgun
Step 1: Tools
-Elmer's Carpenter's Wood Glue
Step 2: Basics
1)Take two Popsicle sticks and glue them together.
2) Do it again then after drying connect the two sets into one by glueing.
Step 3: 4 Sticks
You should have four Popsicle sticks together.
1)Do it again 3 times
2) When you have 4 four Popsicles sticks together then make the box.
Step 4: The Box
To make the box you need to take the four(4 Popsicle sticks that are connected together and glue the edges of one.Repeat for the 3 remaining sides.
P.S. To make this Popsicle gun you will have to make a total of 7 Popsicle boxes.
Step 5: Inside the Box
Once your done making the box,glue two Popsicles sticks together and put them inside the box so the other box can connect(also if you wanted to make the one I made where you can reload it I suggest you do this step).Do it twice per box( remember you have to do it on six boxes).
Step 6: Glue the Rows
After your done creating a row of 3 boxes and you have another one already done Glue
One side to the other so you have 3 boxes side by side.
Step 7: The Trigger
When your done making your 7th box what you need to do is snap two Popsicle sticks not in half but to be able to glue on one side of the box and on the trigger.
Step 8: Conclusion
Congratulations you made a shotgun out of Popsicle sticks. Very cool to make. Hope this instructable helped you out. Enjoy!