Step 2: Building the base
Start out with 4 sticks and place them like so in the picture.
On top of that take 4 more sticks and glue them together to form a rectangle shape.
Be sure the 2 sticks on top are centered and in the middle of the connection.
Take 1 more stick and place it about an inch away from just one previous glued stick.
Take 1 last popsicle stick and cut one end off it (about an inch- like the pic)
SAVE THE LONG PIECE.. set it aside for it will be used later and glue the smaller part of the stick on top centered and in the middle of your 2 sticks that were glued close together previously.
Refer to the pictures for help!
On top of that take 4 more sticks and glue them together to form a rectangle shape.
Be sure the 2 sticks on top are centered and in the middle of the connection.
Take 1 more stick and place it about an inch away from just one previous glued stick.
Take 1 last popsicle stick and cut one end off it (about an inch- like the pic)
SAVE THE LONG PIECE.. set it aside for it will be used later and glue the smaller part of the stick on top centered and in the middle of your 2 sticks that were glued close together previously.
Refer to the pictures for help!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpamfriendlypyromaniac says:
Dec 10, 2011. 11:00 AMReply
hey can I use some of these pictures? I'm using this catapult for my science fair project, and it would be nice to have some of these pictures for my research paper
4
zjschafer (author) says:
Dec 13, 2011. 7:38 PMReply
Sure! Glad to help.
Visit Our Store »
Go Pro Today »
