Step 6: Creating the Rope to Wrap Around a Tree
There should be one foot of Duct Tape on each side of the Hammock coming out from the intersections.
To create the rope wrap Duct Tape starting at the intersection. Wrap upward towards the closest ends around the 1ft strip so that about half of each wrap is on top of the last wrap. Continue this until the end and repeat at least 3 times. It is important to repeat this process because something sharp could cut through otherwise. Repeat on the other side of the Hammock.
To create the rope wrap Duct Tape starting at the intersection. Wrap upward towards the closest ends around the 1ft strip so that about half of each wrap is on top of the last wrap. Continue this until the end and repeat at least 3 times. It is important to repeat this process because something sharp could cut through otherwise. Repeat on the other side of the Hammock.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
