This is Great when your on the go and hungry for a Delicious Roasted Marshmallow.
So let's get Started!
WARNING !! - This instructable uses high heat and open flames. Be Careful.
Use all necessary Precautions.
I am not responsible for your actions!
Step 1: You Will Need....
1. Altoids Tin
3. Skewer or Toothpick
4. One Charcoal Briquette (Charcoal Can Be Substituted by a T-Light Candle to roast the Marshmallow)
5. One T - Light Candle Tin
6. One Small Pill Holder or Small Seal able Container ( Best with O Ring )
7. Lighter Fluid or Charcoal Starter Fluid
8. Matches or Lighter
10. Paper and Tape ( Optional )
And of Course Some of your free time.
Step 2: Prepare Your Tin and Skewer
Then get your T - Light Candle and remove the candle from the candle tin.
IMPORTANT !!!!! - You Need to poke holes in the candle tin so the charcoal can get oxygen.
See Secondary Photo for this step.
After the Above is done place the candle tin into the Altoids tin.
Next take your Skewer and cut it to size so it fits inside the Altiod tin.
Step 3: Break Up Your Charcoal and Make a Charcoal Packet
in my Altoids tin. Well your not.
So we need to break it up into smaller, more
manageable sized prices.
This Stuff is HARD well it is what diamonds are made of.
So take what ever you can i.e Hammer and Chisel to break the charcoal up into Nickel and Penny Sized Chunks.
After that get some paper and your nickel sized chucks then put the charcoal into the paper
and make a Packet of Charcoal.
REASON: You Wrap the charcoal in a packet so it wont rattle around the tin and cover your
marshmallow and other items in Charcoal Dust. Also this provides Greater Portability.