Instructables

Step 2: Prepare Your Tin and Skewer

Take your Altoids Tin and clean it out of any remaining Altoids and Altoid dust.

Then get your T - Light Candle and remove the candle from the candle tin.

IMPORTANT !!!!! - You Need to poke holes in the candle tin so the charcoal can get oxygen.
See Secondary Photo for this step.

After the Above is done place the candle tin into the Altoids tin.

Next take your Skewer and cut it to size so it fits inside the Altiod tin.
 
Remove these adsRemove these ads by Signing Up
sclonley2 years ago
good if ur at high school and hungry