Print PDF
Favorite
Email
Step 3Stick it all in there.
Now that you've hopefully gotten it all wired up, turn it on and give it a test run. Due to the increase in voltage, you'll have a nice little distortion effect. If you have everything working correctly (the little blue LED in the front turns on for me), then go ahead and stick it all in the case (or build your own!).
That paper towel is down there only to insulate the connections from touching the case and shorting out. Totally optional, if you're good at insulating your connections individually. Obviously secure everything with duct tape, and jam it all in there, making sure to reconnect the speaker.
That paper towel is down there only to insulate the connections from touching the case and shorting out. Totally optional, if you're good at insulating your connections individually. Obviously secure everything with duct tape, and jam it all in there, making sure to reconnect the speaker.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
