Print PDF
Favorite
Email
Step 3The Coiling
Thread the wire through the two holes at the top of the bottle
and pull about 8 inches of wire through the holes.
If the holes are large and the wire is loose,
it is OK to loop the wire through the holes again,
making a little loop of wire that holds snuggly.
Now take the long end of the wire and start winding it neatly around the bottle.
When you have wound five windings on the bottle,
stop and make a little loop of wire that stands out from the bottle.
Wrapping the wire around a nail or a pencil makes this easy.
Continue winding another five turns, and another little loop.
Keep doing this until the bottle is completely wrapped in wire,
and you have reached the second set of holes at the bottom of the bottle.
Cut the wire so that at least 8 inches remains,
and thread this remaining wire through the two holes like we did at the top of the bottle.
and pull about 8 inches of wire through the holes.
If the holes are large and the wire is loose,
it is OK to loop the wire through the holes again,
making a little loop of wire that holds snuggly.
Now take the long end of the wire and start winding it neatly around the bottle.
When you have wound five windings on the bottle,
stop and make a little loop of wire that stands out from the bottle.
Wrapping the wire around a nail or a pencil makes this easy.
Continue winding another five turns, and another little loop.
Keep doing this until the bottle is completely wrapped in wire,
and you have reached the second set of holes at the bottom of the bottle.
Cut the wire so that at least 8 inches remains,
and thread this remaining wire through the two holes like we did at the top of the bottle.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
