Introduction: Portable Emergency Phone Charger

This video will explain everything step by step, and here are the parts you will need:

1. Two 9v batteries (and two 9v battery clips)(and wires)

2. Cheap Car charger

3. Standard Altoids Tin

If you like this video, please subscribe to my youtube channel.

Comments

Gomi no Sensei (author)2015-11-30

Most smart phone batteries are 1500-3300mah.

A 9V battery has 50-400mah and at 500mw load has less than 300mah capacity.

You're also losing 30% of that 2 x 300mah thru the circuit.

Just exactly HOW much does this remaining 420mah charge your phone ???

Ref : http://www.powerstream.com/9V-Alkaline-tests.htm

the project was based on its simplicity and an easy-to-recreate build, and I am aware that this charger is inconvenient and not usable. Thanks for commenting though! I will make a better and more convenient version 2.0!

chrisjlionel (author)2015-08-02

Good idea

DIY Hacks and How Tos (author)2015-08-02

Cool project

About This Instructable

873views

28favorites

License:

Bio: I just created a youtube channel to give how-to's and quick previews of all the projects that I make in my garage. I decided ... More »
More by ardystal gysr:Crystal Desktop Shard LightIron Man Arm PrototypeCoin Ring Tutorial
Add instructable to: