Introduction: Final Effect in June :-)

Picture of Final Effect in June :-)

The picture shows the garden on wheels as a final effect.

Step 1: Portable Garden on Wheels

Picture of Portable Garden on Wheels

Because at our patio we don't have enough sun and we want a garden I came up with the idea of a portable garden on wheels. The project started in February. I also didn't want to spend too much money, since our income is limited.

I decided to use some old scaffold parts that were lying around. The picture shows the beginning of the process. We didn't want the garden to be too big, so I made it 57" (145 cm) long and 31" (~ 80 cm) wide. I cut the scaffold and bought 4 planks 1" x 8" x 10'. I don't have a welder so everything is hooked up by screws and bolts. The construction is sturdy enough for the soil and water in it. The bottom is cover by a tarp with 8 small holes made by the screwdriver for draining purposes. The canopy is to protect the plants ( mostly tomatoes ) from the heavy rain. It can also protect the plants from the wind. I added a shaft to be able to move the garden where the sun is.

There are three layers which are filling the box. The first layer is broken branches. The second is partly deteriorated leaves. The final is a top soil. Plants which I have seeded already at home are growing fast. We will have: thyme, oregano, onion, cucumber, parsley, 4 different peppers, sage, tomatoes, basil, marjoram, rosemary, dill and mint.

Step 2: Pipes Cover the Bottom

Picture of Pipes Cover the Bottom

Step 3: Tarp With Small Holes for Draining Purposes (holes Are Not Visible Here)

Picture of Tarp With Small Holes for Draining Purposes (holes Are Not Visible Here)

Step 4: The Shaft, Canopy and Tools

Picture of The Shaft, Canopy and Tools

Step 5: Finished Project

Picture of Finished Project

Step 6: First Layer - Branches

Picture of First Layer - Branches

Step 7: Second Layer - Deteriorating Leaves

Picture of Second Layer - Deteriorating Leaves

Step 8: Final Layer - Top Soil

Picture of Final Layer - Top Soil

Step 9: Tools

Picture of Tools

Comments

mrsmerwin (author)2017-04-02

Why did you make a canopy?

jur-and (author)mrsmerwin2017-04-03

mrsmerwin

The canopy is removable as necessary. It is for plants protection. Plants can't stay in the water, because the roots rot. I don't know how much collected water will drain with the holes I have made in the tarp. Besides my explanation, please read the article in the website below:

http://www.offthegridnews.com/survival-gardening-2/wet-weather-gardening-6-tips-when-the-rain-just-wont-go-away/

mrsmerwin (author)jur-and2017-04-03

Thank you. I was not thinking about too much water. I was interested in this because it would allow me to give the plants maximum sun. That is my biggest problem in gardening--too much blocking the sun. My driveway gets plenty of sun but digging up the concrete seems a bit drastic and planting in the hole I created would prevent the occasional use of the garage. Movable garden seems like a workable solution.

About This Instructable

1,564views

24favorites

License:

Add instructable to: