Print PDF
Favorite
Email
Step 6Insulate Away!
Cut a bunch of 2" x 2" strips of the foam insulation. These should be at least as long as the drum is high. Push the strips down between the two drums. These will provide the majority of the insulation.
Once all the strips are in, fill in the gaps with the "Great Stuff". Don't forget to fill in the access hole in the bottom as well.
Go have a beer and wait for everything to set up.
Once the Great Stuff is cured, trim things up nice and neat.
Considering all the time that it took to cut the strips of insulation, I considered using Great Stuff all the way around. But, I think that would have taken way too many cans and blown the budget. I also looked around for some marine-style pour in insulation but was not able to find any locally.
Once all the strips are in, fill in the gaps with the "Great Stuff". Don't forget to fill in the access hole in the bottom as well.
Go have a beer and wait for everything to set up.
Once the Great Stuff is cured, trim things up nice and neat.
Considering all the time that it took to cut the strips of insulation, I considered using Great Stuff all the way around. But, I think that would have taken way too many cans and blown the budget. I also looked around for some marine-style pour in insulation but was not able to find any locally.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
