Instructables
Picture of Portable, Paperless, Digital Copy Machine
Assembled.jpg
Bottom view1.jpg
Bottom view2.jpg
Broken down.jpg
Don’t wait in line to feed coins into the library’s photocopier!
Here are instructions for making a portable, paperless, digital copy machine.
Your materials should cost less than $20, maybe less than $10, and the labor time is only a few hours. I am assuming that you already have a digital camera and a computer for uploading pictures. Of course, your camera will do most of the work here, but you will provide it with a steady stand that has a press for getting those book pages flat.
The pictures show what the final device looks like, fully assembled …
and broken down for transport.

I suggest several, options for improving your copies – in some cases, low-cost software is involved. If you follow all of the options, you can convert your images into word-searchable documents. You can’t search for keywords in the pages you get off of a copy machine! And think of the trees you will save by going paperless!

(The book pictured here and in steps 6, 7, and 10 is volume 2 of The World Book Encyclopedia, 1989.)

 
Remove these adsRemove these ads by Signing Up

Step 1: Parts needed

Picture of Parts needed
1x Plexiglass plate, about 12” x 10’’ x ¼”
2x threaded rods, 36” x ¼”
1x Tygon tubing, 6’ x ¼” inside diameter
16x ¼” nuts
5x ¼” wing nuts
4x ¼” stop nuts or acorn nuts
1x 1½” x ¼” bolt
1x wood scrap, about 4” x 2” x ½” (size depends on your camera)
2x 2” angle brackets (with ¼” holes)
4x wood screws, ½”

Tools needed:
drill and bits (including size 5/16”)
hack saw (for cutting the threaded rods)
vise (or pliers, for bending the rods)
two wrenches (adjustable or fixed-gap wrenches of 7/16” or 11 mm, or pliers)
metal file (for smoothing the cut rod ends)

Step 2: Assemble the camera mount

Picture of Assemble the camera mount
Step2b.jpg
Position the angle brackets onto the wood scrap.
   (Mine are 3” apart.)
Mark the holes.
Drill pilot holes for the wood screws.
Screw the angle brackets in place.
Position the camera, with its lens centered between the brackets.
   (Leave clearance for the wingnuts – read ahead.)
Mark the position of the camera’s threaded, tripod hole.
Drill a 5/16” hole for the 1 ½” x ¼” bolt.
Test-mount the camera, using one wingnut on the bolt to snug-up the camera.
mvillalpando7 months ago

I actually made this to see how easy and how sturdy it was. I was surprised to see that it was indeed pretty sturdy, but I was not impressed with the angles of the connection rods. I think that I can make it better by using wood. I will try to redo this and post pics. I love it though!

TheGreatS3 years ago
Nifty.
19charbel964 years ago
great instructable!!! 5 stars :-D . it really help me when i forget my books at school and goes to my friend to photocopy it !!! :-D :-D
oldwolves4 years ago
Quick question, please. My wife just gave me a Kindle for my birthday. I love it . However I have over a hundred reference books that I would like to convert to PDF and upload to my kindle. This instructible sounds like a possible solution for me. Is this feasable? I am only using these uploaded PDF's for personal use so copyright issues shouldn't come into play. Thoughts?
I have a very cheap PMP bought off eBay (~$30). It has the ability to playback TXT files (need OCR) or photographs directly so I can read my copy stand documents on that just about anywhere.
DHagen (author)  oldwolves4 years ago
   Cool. I didn't even know that you could upload your own pdfs to a Kindle. That will be a great way to manage your documents. 
   I think you would be better off in your project with a flat bed scanner. Of course, you may not have access to one if your reference books are in the library. With the scanner approach, the key is to get it set up correctly beforehand -- you'll want properly exposed, black-and-white copies, pdf format for the output, and multi-pages combined into one file. Then you can speed through lots of pages and keep the file sizes reasonably small.
   With the photographic approach, you will spend lot of time, page-by-page doing steps 7-10. And then you'll want some utility like CutePDF for editing your pdfs, rotating pages, inserting skipped pages, etc. If you go the photographic route, be sure to see the New-and-Impoved version of the copy stand (http://www.instructables.com/id/New-Improved-Portable-Paperless-Digital-Copy-M/) if you haven't seen that yet.
t.rohner4 years ago
Nice instructable
maybe you could take a acrylic with antireflective coating to minimize the reflections of the stand and camera.
If your camera supports it, a polarising filter would work just as well.  Simply adjust so that reflections from the plexiglass do not appear.  You'd just have to buy a CPL with a small diameter and tape it in front of the lens and it would work fine - with a bit of fiddling to get the right amount of rotation.
A polarizing filter won't help much in this situation; they can only block light that has been polarized by reflections near the Brewster angle. In this case the light is reflected virtually perpendicular to the plastic so the polarization is very small.
You could try cross-polarization between the lights and the lens, You would have to polarize each light source close to ninety degrees from the polarizing lens filter. You can get polarizing gels for the light sources but I am not sure how expensive this would be.
jcrash4 years ago
 Did this over the weekend.  Had a few issues, not with the design but with my ability to implement it.  I went with a slightly bigger piece of acrylic.  I found for single page documents (or multi-page that I've ripped the staple out of for this purpose and stapled again when done), I didn't need to put it under the glass.  Anyhow, the bigger glass but same sized rods resulted in my having to use a bigger piece of wood.  Blessing in disguise: I drilled two holes--one for the $50 10 MP camera that does great for this, and one for my wife's Canon Rebel xti that also does GREAT for this...and has the nice feature of shooting with a remote button.

I'd been looking at the other designs.  While brilliant and well-executed, this much simpler, less to break, portable even if you don' t take it apart first design works much better on a grad student budget in a grad student [read small] apartment.  Thanks for taking the time to actually photograph and upload your design and methods.

Currently, I'm playing around with light sources and positions to minimize glare and reflectivity issues.
DHagen (author)  jcrash4 years ago
Thanks for the kind comments & for your ethusiasm for this Instructable.

To avoid the reflections -- the main fault with this model -- I developed a similar copy stand with no plastic. See http://www.instructables.com/id/New-Improved-Portable-Paperless-Digital-Copy-M/ The downside to the new one is that the frame has to be reset for each size of book., Once setup, the new model is fast and reflection free (if the pages themselves aren't shiny). Furthermore, it is more compact when broken down.
xadevox4 years ago
where can i get plexiglass plate?
DHagen (author)  xadevox4 years ago
Hi xadevox. Thanks for your interest. In Eugene, OR, we have a plastics supply store. I got my piece for two dollars off of the scrap pile.

But for a better & cheaper (if you can't find a scrap) design see:
http://www.instructables.com/id/New-Improved-Portable-Paperless-Digital-Copy-M/
DHagen (author) 4 years ago
Thanks everyone for the kind words.

You guys are really sharp and spotted the biggest weakness of this design - the reflections you get off of the acrylic "page-press". Many of you had great suggestions for how to avoid this e.g.  by using non-reflective acylic. But stay tuned, I will soon post a simple revision that doesn't use plastic at all. Instead it uses a simple, adjustable, windowless frame.
All you have to do is cover the legs part the way down with a pyramidal tent (or hood) of light proof fabric = black out cloth. You can test this with a black scarf; just wrap it around the legs starting at the camera and work your way towards the plastic sheet until you get zero reflections.

I am sure your windowless frame will work. With my copy stand (http://www.instructables.com/id/Copy-Stand-Cheap-and-easy-to-build/) I abandoned sheets of plastic, glass and black out cloths to speed things up. I found that you didn't really need to keep the pages flat to get legible copies.

Yours is a good simple design, I will probably build one for portable use if I can think of lighter legs.

Patented4 years ago
hey very nice ible, your pictures are very well done!

but wont the plexiglass make the picture worse, because of the reflect?
no becuse theres no flash
DHagen (author)  Patented4 years ago
Thanks for the comment. You are exactly right. The Plexiglass creates some reflection problems. However, the image cleanup (step 7) resolves most problems -- see the before and after pictures. I thought about using a frame for a press, like an empty picture frame with no glass, but it depended too much on the size of the book.
Nifty idea. If you're making quick copies for reference or for a usethat doesn't require high fidelity the results are ok!
But if it's an issue you can try and find  cheap polarizing filterand hold it in front of the lens to get rid of most reflections (or finda way to attach it to the front.)
Gonazar DHagen4 years ago
mmm even with your after photo, you can see a faint image of one of the supports going across the butterfly.
Maybe you can use an adaptation of this http://www.instructables.com/id/DIY-High-Speed-Book-Scanner-from-Trash-and-Cheap-C/?ALLSTEPS
The way they have their glass-lighting-camera setup, the angles prevent getting any reflections.
either that or paint the supports black

 perspects no good?
Maybe using a thick glass instead of plexiglass...

Good work!.
mikeasaurus4 years ago
I've used this technique before for all kinds of printed application,you've done a great job explaining it.

It's funny how obvious and simple it seems when it's put this way.However simple, yours is a far more practical version of something that has been over engineered.
solsed4 years ago
 and it may be possible (it used to be possible) to get lowreflectivity plastic or glass from picture framers and glass or plasticsuppliers. it is a bit more expensive but if you want quality results

solsed4 years ago
 I suggest you make a sheer white fabric (eg ripstop nylon) hood togo over the legs. it will dramatically reduce reflections from aroundthe room and give more even lighting over the thing you are copying.
profpat4 years ago
very good innovation, will try it, i have lots of plexiglass taken fromdefective lcd panels and old scanners(glass panes).
macrumpton4 years ago
It looks really sturdy. I think you could probably make do with just 2(on diagonals) or 3 legs for such a light camera.
endolith4 years ago
The reflection of the camera legs is still visible in the picture. How do you get rid of reflections?
If the legs were black, they would not reflect.
whiteoakart4 years ago
very nice and simple, too.  I agree with others that someanti-reflective plexi would be an excellent addition.
Imagerlus4 years ago
I made a different setup, but it does the same. Do a search for a freesoftware called 'GIMP' that apparently has a function that canstraighten the image before cropping. Tucows.com should have it.
Yes, GIMP can correct skew and rotation using the"Perspective" ("corrective") tool
heathbar644 years ago
Way long ago I used a copy stand with a regular slr camera to copyantique photo's for which i had no negative. I've kinda gotten away fromphotography, so never got around to do this with a digital, but you'veinspired me to try it. the clean up options with digital are a big plus.
frollard4 years ago
Pretty excellent build - I've always done this but by hand.  You can get a piece of plexi that has a matte finish on one side- it seems you cant see through it until you place it against the piece (its for photo frames) - then it reduces reflections without reducing quality.
boonokian4 years ago
This is a fantastic idea.  Great instructable.
DHagen (author)  boonokian4 years ago
Thanks.