Introduction: Pose-able Paracord Torch Wrap
I wanted a stand alone torch I could place somewhere, anywhere and to use hands free, I didn't want to hold it in my mouth with Sylvia running down it so this is what I came up with.
Twin and earth plug socket cable
Cut the electrical wire about twice as long as the torch.
Split this and remove the 2 outer wires.
Now cut 2 pieces of paracord 100mm longer than the wire pull out the inner cords and just slip the wire into the now made paracord outer sleeve.
Seal the ends and you have made the bendy twisty leggy parts.
I had these stainless steel things that I found at work and borrowed them they made beauty ends for the bendy twisty leggy parts.
Tape the bendy twisty leggy parts to the torch I made mine lenser at the front.
Then simply whip the bad boys onto the torch and you have done.
I wanted to do a Turks head wrap but it blew my brain trying to work it out so did it this way but any torch wrap would do.
You can take him almost anywhere, camping fishing walking or put him in the cupboard for that electricity cut he won't mind and you can get him to hang hug stand and pose in any position you want he loves trees poles paracord lines arms and belts.
We have a be nice policy.
Please be positive and constructive.