Print PDF
Favorite
Email
Step 6The Back Block
The back block will be used to hold the other side of the generator assemblies and to hold the spring. Mine looks sort of rough, but it worked pretty well. You can easily make this piece on a band saw and fashion it out so it will fit the shoe you are working with.
The front part will connect with the generator assemblies and the two tower-like appendages are for holding the spring.
Its not shown in the picture, but you will need to drill a hole in each tower so a wire will be able to pass through.
The front part will connect with the generator assemblies and the two tower-like appendages are for holding the spring.
Its not shown in the picture, but you will need to drill a hole in each tower so a wire will be able to pass through.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
