Print PDF
Favorite
Email
Step 17Secure and Connect the Battery (Rechargable Lithium-Polymer)
If you're using a rechargeable Lithium-Polymer battery, first cut a small slit into the glove's rubber, between the battery clip and the existing slit for the velcro strap. Wedge the battery into the plastic strap anchor on the glove's underside, with the battery leads sticking out through the slit you cut. If you used the same battery I did, it should fit snugly without the need for additional anchoring.
Connect the battery to the battery clip. Remember to unclip it when you're not using it!
Connect the battery to the battery clip. Remember to unclip it when you're not using it!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
