Print PDF
Favorite
Email
Step 3Secure template to cardboard
The pre-designed template assumes you are using a 3/16" thick piece of cardboard. If you are using a thinner or thicker piece of cardboard, adjust the width of the slots accordingly.
Tape the (computer printed or hand sketched) paper template to your piece of cardboard.
Pay particular attention to the direction of the corrugated flutes: to retain enough structure, the flutes should run perpendicular to the tail.
Tape the (computer printed or hand sketched) paper template to your piece of cardboard.
Pay particular attention to the direction of the corrugated flutes: to retain enough structure, the flutes should run perpendicular to the tail.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
