My first gun of my series of knex guns
my first gun
it shoots pretty good about 40-50 feet
also good accuracy

bolt action(not true bolt)
true trigger
6 round hopper
nice foregrip

nothing I can think of


DJ Radio
The Dunkis

here is a sideshow of my next gun

Step 1: Handle and Trigger

1. make 2
3. connect

Step 2: Stock

1. make 2
2.add pieces to 1 side
3. ram(two orange connectors,gray rod, and a yellow connector taped)
5-6. add pieces

Step 3: Barrel

really easy to build

Step 4: The Hopper

1.make 2
2.add white rods
3.add orange connectors with green rods
4.connect the two sides

Step 5: Body

1.make two
2.add connectors

Step 6: Foregrip

easy to make follow the pics
just yellow connectors, single gray connectors, and double gray connectors

Step 7: Connections

1.connect barrel
2.connect hopper
3.connect stock
4.connect handle

Step 8: Scope(optional)

make if u want
i made it so it can detach quickly
1-2. the scope
3. make 2
4 connect
5.connect scope

Step 9: Rubber Bands

follow the pics

Step 10:

hurray your done now go shoot something paper cardboard siblings parents anything wont be my fault(read the first page)
cool gun
Here's a con for you: bears resemblance to other guns.
jamalam and scar copy but beter than a block triger. 2.5*
yes i admit it kinda looks like some of jamalam's guns and the scar, but that is a complete coincidence, i never aimed on making it look the same
Hmm, it's an interesting fusion of the AR4v3, The Jamalam's rifle(s), and Extreme Builder's rifle maybe? Anyway, decent job, 3 stars, good first instructable.
My AR-4v3 still kicks this guy's rifle's butt any day. It gets better ranges.
you have more experience with knex guns then i do this only my first
I know that, I will tell you why my gun gets better ranges. My gun uses a true bolt, which basically treats each round like a single shot. Single shots get better range.
very true
As said before it looks a bit like Jamalam's rifles. By the way, the tan clips in the barrel will fail a lot, I suggest you using broken gray connecters, or broken-in-half orange connectors.
so far the clips work fine they, haven't failed yet
It may just be my experience with them before, but it might depend on the barrel design. I just on ipod-killer's, they didn't work, for me at least.
They wont fail.
Decent, I don't think it is similar to mine. Just that TBM made the handgrip.
i would have to say a great gun then some of the others i built it with 1 thick rubber band and it shot a good 40-50 feet
It looks like the majority of this gun was based off of AR-4 v3, except for the foregirp and trigger, which look like Jammy's.
funny thing is was i started to build your ar-4 v2 but i only got the handle,stock, and barrel then i put my own style in it. the only thing the same from the ar4 v2 is the handle the forgrip is a part from The Dunkis' ump just extended the triger i just made so i can work
Btw, 4*

About This Instructable




More by Pretty P:S.A.R v3.3 S.A.R 2.0 S.A.R 2.0 
Add instructable to: