Instructables
STRIKE ATTACK RIFFLE 1.0
My first gun of my series of knex guns
my first gun
it shoots pretty good about 40-50 feet
also good accuracy

Pros:
bolt action(not true bolt)
true trigger
6 round hopper
nice foregrip
scope(optional)

CONS:
nothing I can think of

NOT AT FAULT FOR ANY STUPIDITY

CREDITS:
DJ Radio
The Dunkis


here is a sideshow of my next gun
www.instructables.com/id/SAR-20/

Step 1: Handle and trigger

Picture of handle and trigger
IMG_2532.JPG
IMG_2536.JPG
1. make 2
2.make
3. connect

Step 2: Stock

Picture of stock
IMG_2540.JPG
IMG_2544.JPG
1. make 2
2.add pieces to 1 side
3. ram(two orange connectors,gray rod, and a yellow connector taped)
4.connect
5-6. add pieces

Step 3: Barrel

Picture of Barrel
IMG_2538.JPG
really easy to build
1.top
2.bottom

Step 4: The hopper

Picture of the hopper
IMG_2547.JPG
IMG_2548.JPG
IMG_2549.JPG
1.make 2
2.add white rods
3.add orange connectors with green rods
4.connect the two sides

Step 5: Body

1.make two
2.add connectors

Step 6: Foregrip

Picture of foregrip
IMG_2557.JPG
easy to make follow the pics
just yellow connectors, single gray connectors, and double gray connectors

Step 7: Connections

IMG_2555.JPG
IMG_2553.JPG
IMG_2554.JPG
normal.JPG
1.connect barrel
2.connect hopper
3.connect stock
4.connect handle

Step 8: Scope(optional)

IMG_2561.JPG
IMG_2562.JPG
make if u want
i made it so it can detach quickly
1-2. the scope
3. make 2
4 connect
5.connect scope

Step 10:

Picture of
hurray your done now go shoot something paper cardboard siblings parents anything wont be my fault(read the first page)
 
Remove these adsRemove these ads by Signing Up
cool gun
DJ Radio5 years ago
Here's a con for you: bears resemblance to other guns.
amtdude5 years ago
jamalam and scar copy but beter than a block triger. 2.5*
Pretty P (author)  amtdude5 years ago
yes i admit it kinda looks like some of jamalam's guns and the scar, but that is a complete coincidence, i never aimed on making it look the same
Oblivitus5 years ago
Hmm, it's an interesting fusion of the AR4v3, The Jamalam's rifle(s), and Extreme Builder's rifle maybe? Anyway, decent job, 3 stars, good first instructable.
My AR-4v3 still kicks this guy's rifle's butt any day. It gets better ranges.
Pretty P (author)  DJ Radio5 years ago
you have more experience with knex guns then i do this only my first
I know that, I will tell you why my gun gets better ranges. My gun uses a true bolt, which basically treats each round like a single shot. Single shots get better range.
Pretty P (author)  DJ Radio5 years ago
very true
Raikou-san5 years ago
As said before it looks a bit like Jamalam's rifles. By the way, the tan clips in the barrel will fail a lot, I suggest you using broken gray connecters, or broken-in-half orange connectors.
Pretty P (author)  Raikou-san5 years ago
so far the clips work fine they, haven't failed yet
It may just be my experience with them before, but it might depend on the barrel design. I just on ipod-killer's, they didn't work, for me at least.
They wont fail.
The Jamalam5 years ago
Decent, I don't think it is similar to mine. Just that TBM made the handgrip.
$rKizz^lot5 years ago
i would have to say a great gun then some of the others i built it with 1 thick rubber band and it shot a good 40-50 feet
DJ Radio5 years ago
It looks like the majority of this gun was based off of AR-4 v3, except for the foregirp and trigger, which look like Jammy's.
Pretty P (author)  DJ Radio5 years ago
funny thing is was i started to build your ar-4 v2 but i only got the handle,stock, and barrel then i put my own style in it. the only thing the same from the ar4 v2 is the handle the forgrip is a part from The Dunkis' ump just extended the triger i just made so i can work
Btw, 4*
Pretty P (author)  DJ Radio5 years ago
thx