Many cars have a reflective or a not very noticeable courtesy light on the inner side of the door, but they're not always very effective for this purpose.
With this instructable we're trying to promote the use of these lights.
We’ll explain step by step the process to install the preventive lights for the door edge.
We used a Nissan Tsuru 2004, you have to adapt the system to your vehicle, but there's not a big difference between them.
You can check the full manual in the attached PDF.
This is a school project made by:
Carlos Peña Michel
Eduardo Altamirano Castro
Daniel Alfonso Caballero Cruz
Step 1: Get the materials
• 12 Volts RGB LED Set
• Cable /Wire (6m)
• Welder wire & Solder Paste
• Soldering iron.
• Scissors / Tweezers