Print PDF
Favorite
Email
Step 3Prepare to print.
Open Roland VersaWorks.
Select "File ---> Add Job to Queue A"
Choose your TIFF file (or EPS if you are using Illustrator).
Double click on your file in the queue.
On the left hand menu bar:
- Under "Layout" make sure that your image file is less than the usable print space.
- Under "Quality" select for your media type, "Matte Calendared Vinyl (MCVP)" and then choose "Standard" for the print quality. This will set your dpi to 720. You don't want to go much greater than that.
- Under "Printer Controls" make sure that "Cut Sheet after Output" is deselected.
When the controls are set, hit "OK" on the bottom.
Select "File ---> Add Job to Queue A"
Choose your TIFF file (or EPS if you are using Illustrator).
Double click on your file in the queue.
On the left hand menu bar:
- Under "Layout" make sure that your image file is less than the usable print space.
- Under "Quality" select for your media type, "Matte Calendared Vinyl (MCVP)" and then choose "Standard" for the print quality. This will set your dpi to 720. You don't want to go much greater than that.
- Under "Printer Controls" make sure that "Cut Sheet after Output" is deselected.
When the controls are set, hit "OK" on the bottom.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
