Print PDF
Favorite
Email
Step 3Accessing The Data
The most impressive aspect of Hardware keyloggers lies in their programming. To access your data, simply open a text editor (Notepad or Mousepad in linux ;-p) and type your password. Then hit enter. This prompts the keylogger to create a text menu (shown below).
From the menu, you can change your default password, access the recorded data, erase the memory, enable or disable recording and adjust the menu speed.
You can access the stored data by pressing 1. The menu continues, and asks which sector of the keylogger you wish to access. Pressing w will make the keylogger 'type out' all the recorded data into the notepad file. Watch the video to get a better idea of how this works.
From the menu, you can change your default password, access the recorded data, erase the memory, enable or disable recording and adjust the menu speed.
You can access the stored data by pressing 1. The menu continues, and asks which sector of the keylogger you wish to access. Pressing w will make the keylogger 'type out' all the recorded data into the notepad file. Watch the video to get a better idea of how this works.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
