Picture of Prototype Special Paper Airplane
This instructable will teach you how to make the Prototype Special Paper Airplane.
Remove these adsRemove these ads by Signing Up

Step 1: 1

Picture of 1
Start with a regular piece of paper.

Step 2: 2

Picture of 2
Fold the piece of paper in half lengthwise.

Step 3: 3

Picture of 3
Fold one corner on each side so it touches the first fold.

Step 4: 4

Picture of 4
With a normal paper airplane you would fold it again to the outside, but now you fold it to the inside.

Step 5: 5

Picture of 5
Fold to the outside, this will give it a 3 teared apperance.

Step 6: 6

When the airplane seems finished open it up and fold the nose inward.

Step 7: 7

Tear or cut the bottom of the paper airplane at the back and push the section up to form a fin.

Step 8: 8

You are done making the Prototype Special Paper Airplane.
legoman1111 year ago
Interesting but cool. I made mine have 4 wings(vertical stabilizer not one). l=vertical
legoman1111 year ago
"teared" is spelled tiered. If anything, "teared" looks like teared meaning torn. Just fyi.
legoman1111 year ago
That is NOT an ordinary piece of paper.
pyrobanana2 years ago
"Oragomi" is spelled origami fyi
kidbuilder4 years ago
thats a cool plane
(removed by author or community request)
pigeon853 (author)  bigfatgooglefat5 years ago
Are you shure? Because if you look carfully the airplane has 3 layers and is folded different than the standard paper airplane. TY for the heads up
Yeah I think this is the design that I use. It's a good way to make them though, and I'm not sure everyone knows about it. Hopefully some people will learn from this -ible.