Print PDF
Favorite
Email
Hey, we previously posted a proof of concept instructable here, and just last week we built a full-on version for an exhibition in Seville called Over The Game @ Zemo98.
This instructable is for an exhibition version of the original game concept.
So, here we go!
t - j - m
This instructable is for an exhibition version of the original game concept.
So, here we go!
t - j - m
Remove these ads by
Signing UpStep 1Things You NEED
WIRE (lots of it and preferably solid hookup... we use 22 guage).
1 usb pc game controller
1 designed box for the installation
1 flash for professional photography
1 arduino, with a relay setup for triggering the flash
1 computer
1 projector + ceiling mount
1 pillow (we use 2 layers, 1x 8cm thick firm foam + 1x 2cm thick soft foam, both 75x100cm)
soldering bits, lots of tape and some thin foam for touch pads
1 usb pc game controller
1 designed box for the installation
1 flash for professional photography
1 arduino, with a relay setup for triggering the flash
1 computer
1 projector + ceiling mount
1 pillow (we use 2 layers, 1x 8cm thick firm foam + 1x 2cm thick soft foam, both 75x100cm)
soldering bits, lots of tape and some thin foam for touch pads
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
2
Feb 26, 2010. 1:30 PMfalcotheimpaler
says:
I freaking love it.
Reply
 |
Add Comment
|
